Project Page
4' Mini Half Pipe
By haloisalive
|
|
|
Notes
Im am 14.... the town i live in has no where to skate so i built this from 90% scratch all i bought was some screws and masonite.....I used 3/4inch plyboard for the skeleton and 2by4s
i put 2 layers of 3/8inch plyboard down then to top it off i put masonite I used some 1 1/2 inch diameter coping and the transition was 6' 6" it was a little slopy but i should of made it a little steper.....I solved the problen by making the flat bottom shorter it then turned out great! Any questions just ask!
Build Date
July 2007
Location
Saint jo
Contact
